Great product
"Great tool and easy to install. Would highly recommend to anyone looking for a tool to take on the trail."
EDC Threadless Carrier Kit
Threadless Carrier.
It takes less than 10 minutes to turn your steerer tube into a portable workshop. Just remove the start nut, drop in the EDC Threadless Carrier. Then, you will be able to store a EDC V2 Tool and the EDC Tire Plug Kit in your stem.
EDC V2 Tool.
The 20-function EDC V2 Tool is the heart of the Threaded EDC system. It includes a 10 function Multi-Tool, Tire Lever, Chain Breaker, steel spoke keys, quick link storage, and a small and large storage capsule designed to a jabber, tire plugs, and quick link pliers.
Plug Kit.
The EDC Plug kit is the perfect addition to the EDC tool system. The kit includes a tire jabber and additional plugs. The EDC Threadless Carrier and 70cc Pump will only fit the jabber and tireplugs - no pliers.
FAQ
Will the threadless carrier fit my Fox 38 fork?
The Threadless carrier is only comptible with Fox 38 Performance Elite & Factory series forks that have a steerer tube longer than 245mm.
I went to install my threadless carrier, and it stops before fully inserting into my steerer tube?
If the threadless carrier will not fully insert into your fork, then it is likely that the length of your steerer tube is less than the minimum requirement. Please double check your steerer length and compare it to our compatibility list before proceeding.
What size are the pins on the Oneup Components Aluminum Pedal?
The pins measure 5mm in diameter.
My tool does not fully insert into the threadless carrier?
There are three possibilities for this:
1. Make sure the middle O-ring has been removed from the EDC tool system.
2. Is the mutli tool oriented correctly within the EDC tool body? If it is backward and not meshing will the tire lever, the tool will bulge and will not fit into any holder.
3. Check the steerer tube length, if you there was any force required during installation of the carrier then it is likely under pressure and flexing. This means your fork steerer length is too short, or it is an incompatible fork.
Will the threadless carrier fit in a fork with a straight steerer?
It is possible with some pre-requisite checks.
1. Steerer ID meets the compatibility requirements for the Threadless carrier (Min ID: 24.25mm)
2. Steerer does not neck internally at any point. You can check this by running a straight edge down & against the internal wall of your steerer. If it deflects then it necks and is not compatible.
3. Steerer is within our compatible length range. 185mm-265mm
4. Your current Top cap will need to replace the 1-1/2 plug supplied with our Threadless carriers. So check that the top cap fits flush without rocking, in the underside of the fork steerer.
If you can confirm all of these requirements are good then you should have no issue installing our threadless carrier in your straight steerer fork.
Will the EDC Threadless carrier work in carbon steerers?
Unfortunately, none of our EDC options are compatible with forks with carbon steerer tubes.
Can you fit the plier and plier kit in the threadless carrier?
The plug and bacon strips with fit within the small storage capsule and then fit into the threadless carrier. The Pliers, the large storage capsule or a c02 cartridge do not fit in the threadless carrier.
How do I use the chainbreaker?
The chainbreaker is mounted to the tire lever. Using the T25 in the multi tool, loosen the chainbreaker and rotate it perpendicular to the tire lever. Using the 3mm in the multi tool, back the pin off, then you can position the tool around the chainlink and thread to pin back in until you have broken the chain!
Reviews
Overall rating: 4.735849 / 5 from 159 reviews.
AI Generated Review Summary
The EDC Threadless Carrier offers easy access to tools, is well-built and easy to install, fits smoothly, and is of outstanding quality. Customers appreciate its great looks and functionality.
Summary topics
- Tool Access: 4%
- Carrier Build: 6%
- Product Fit: 7%
- Installation Ease: 25%
- Product Appearance: 11%
Review topics: ["fit","quality","looks","issues","color","design","improvement","post","finish","instructions","setup","works","build","support","tool","install","carrier","system","access","cap","nuts","tube","buy","holds","solution","idea","addition","rides","kit","machining"].
Review highlights
- "Nice smooth fit, little gold accent looks great." —
- "Great compact tool, hard installation" —
- "I’m really pleased with my edc tool and thread less carrier." —
Reviews
Nice, but too long in my opinion
"This is a great piece of kit and solves the problem of carrying a multi tool, or really forgetting a multi tool. Good quality and have used others on another bike. My only complaint is it is too long and requires too long a steerer tube, They should make a shorter version by like 20 millimeters so you don't need a 190mm steerer tube."
EDC Threadless Carrier
"Knocked off a star because the larger storage tube won't fit with the threadless carrier. Otherwise the installation was very straightforward and it seems like a solid product."
Install was easy and works
"Install was easy and works as advertised. Well made product"
Easy tool holder in the classic green
"So easy to use and reminds me of bmx parts."
Great quality. Straightforward installation
"Great quality. Straightforward installation"
It was a present for
"It was a present for my son who is very happy with it."
Easy to install and a
"Easy to install and a great way for carrying tools"
I like the design so
"I like the design so much, I put it on all my bikes! Purchased a new bike and purchased another kit to install on it."
EDC Carrier
"Fit and finish are amazing. Easy install and fast shipping."
Q&A
- Hi. I have a specialised diverge 2024 and a kona sutra ULTD. Do you know which stem kits threadless or threaded i would need for the EDC carrier?
- Hey Ray, I can't say for sure. It depends on how your bike is set up. Please check in with our calculator here -https://uk.oneupcomponents.com/pages/edc-fork-calculator-compatibility It will be the best resource to get you rolling!
- Hi, I’ve gone to install the threadless carrier and v2 tool. The fork steerer is well within length and the thread less carrier fits fine. However the v2 tool will not go in, not even close. It’s not even dropped half way in before it stops. I can send photos with the length of my steerer and brand. Thanks
- Hi Rob, Thanks for your message, I'm happy to help. For the EDC V2 Tool to fit in the Threadless carrier you need to remove the large storage capsule, and the o-ring that sits just above the threads for the capsule. This is all listed in the installation instructions. The tool will then slide into the carrier in one of two positions, 180 degrees apart. Let me know if that works for you. Cheers,
- Hi, my name is Janek. I have a RockShox Zeb Ultimate with a 200mm steerer length. I used your EDC Fork Calculator, and it said that the threadless carrier is not compatible with the fork, and I was wondering why that is, as other forks are compatible down to 190mm and what will happen if I do try to fit it. Kind Regards
- Hi Janek, Thanks for your message, I'm happy to help. Rockshox forks require a 220mm steerer tube length due to the internal necking inside the steerer tube. Most other forks only require a 190mm long steerer. The good news is you can still use the threaded top cap with your measurement. Hope this helps, please let me know if there's anything else I can do for you. Cheers,
- If I have a Lyrik ultimate with a 210 steerer can I use the thread less carrier if I don’t use a CO2 cartridge
- Hey Fraser, Thanks for your message, I'm happy to help. Unfortunately that wouldn't work, Rockshox forks needed a steerer tube that is at least 220mm long for the threadless carrier to work. The threaded top cap would work for you though. It would mean you could store a CO2 cartridge as well if you wanted. Hope this helps, please let me know if there's anything else I can do for you. Cheers,
