Best Pump!
"This instantly became my favorite pump, I've had quite a few. It has great pumping feel, easy to put onto the valve, can operate a CO2, and holds my tools!"
100cc EDC Pump Kit
100cc Pump.
The 100cc EDC Pump is a high-volume pump designed to carry our EDC Tool System and Pliers & Plug Kit. Its hollow design and CNC aluminum construction make it ultralight and durable.
V2 Tool System.
The 20-function EDC Tool is the heart of the EDC Pump system. Choose between the Plug & Plier Kit or CO2 cartridge to add to the bottom of your EDC Tool. Then, fit it all snugly inside your pump and ride.
Plug & Plier Kit.
The EDC Plug & Pliers kit is the perfect addition to the EDC Pump system. The full kit of pliers, a tire jabber, and additional plugs will only fit inside the 100cc pump. Be ready for anything with your EDC Pump.
FAQ
Will the pump work with my Clik valves?
The pump has a standard Presta head, which does allow the pump to work with a Clik valve. However, based on rider feedback, we're aware that the pump can feel quite stiff during use.
I got the multi tool and pump, why does the tool rattle in the pump?
The multi tool is just one part of a whole. It is designed to be held captive within the EDC tool system. That complete tool can then be inserted into the pump and everything will be held nice, quiet and compact. Here is a link to the complete EDC tool system.
Do you sell replacement pump straps?
Yes! We have three packs of pump mount straps available in the EDC small parts section of the website.
Why is the tool hard to remove form my pump?
It is likely that the top O-ring is dry. Best thing to do is rub a small amount of grease onto the o-ring and re-install it. If that does not help, please email us at support@oneupcomponents.com.
What is the max the pump mount can be spaced from the bolt? WIll this fit my Wide down tube?
The pump mount has a max extension of 30mm from the center of the mounting bolts.
My pump handle is extending while riding, what can I do?
First make sure the handle seal is fully seated onto the handle. Then make sure you are running the pump with the pointed handle up. If it continue to extend, please email us at support@oneupcomponents.com and we can help!
Where is and how do I remove the CO2 inflator head from the pump?
The inflator head of the pump (the anodized green part) doubles as a CO2 inflator head, simply unthread it from the pump and you can thread your CO2 right onto it.
It can be quite snug from assembly, the first removal may require you use an 8mm hex key to unthread it.
Is this pump compatible with both Presta and Shraeder valves?
This pump is only compatible with Presta valves.
What is the max PSI for these pumps?
This pump is designed for MTB and gravel applications. It will happily get to 50-60PSI. Any pressure beyond that is not practical and we do not recommended this pump for high pressure road applications.
The pump doesn't seem to fit my valve, whats going on?
The pump head fits quite snugly on the valves when new. Be sure you give it a firm & straight push down onto the valve before inflating.
Reviews
Overall rating: 4.84127 / 5 from 504 reviews.
AI Generated Review Summary
The 70cc EDC Pump is praised for its sturdy design, high-quality construction, and excellent customer service. It offers a perfect fit, great storage, and a high volume, making it ideal for trailside repairs. Customers also appreciate the fantastic kit and the pump's performance.
Summary topics
- Product Design: 9%
- Tool Quality: 17%
- Storage Capacity: 3%
- Product Fit: 7%
- Kit Quality: 5%
Review topics: ["fit","size","model","issues","straps","weight","quality","function","material","looks","design","post","feel","package","construction","works","finish","volume","customer service","support","air","build","grip","service","pressure","metal","pump","tool","kit","storage"].
Review highlights
- "Pump works really well and to have your multi tool stored away in it is awesome." —
- "High Quality Pump & Tool" —
- "Good quality, useful tool, cool design." —
Reviews
EDC pump
"Solid piece of engineering. . Love one up kit"
Needs an optional Clik pump inflator assembly
"Well made product with good support, but lack of Clik compatibility makes it a non-starter for many of us. I would happily pay for an optional Clik compatible replacement pump inflator assembly."
So far so good. The
"So far so good. The pump works really well and the mounting is super strong. I’ve only had to use the pump once or twice, but I ride easy knowing that it’s always with me."
Pompe
"Très bonne pompe"
Quality Product, Well Built, Fantastic Customer Service.
"Quality Product, Well Built, Fantastic Customer Service."
One Up 100cc EDC pump
"Great pump. Took falling off my bike due to my own error and getting run over by several vehicles to barely kill it and even then the fine folks at One Up helped me out with a crash replacement discount so o could get another one. Solid product, solid company."
Good pump but could use some improvements.
"I really like the pump overall. The good: - Lightweight and easy to mount - Optional inline mount or bottle cage mount options. I've used both. The bad: - The rubber presta valve plug that plugs into the actuator is so tight, it sometimes won't plug in (or stay in). The issue I have run into, is that this will explode the green pump inflator assembly to water and dirt. After a while, this will start to corrode the internal parts of the assembly and will prevent the assembly from allowing air to go through, rendering it useless. I've tried to soak it in WD40 to try to free it up, but ended up having to order a new assembly. - I've broken the bottle cage mount twice now, after a couple crashes. The issue is, the pump sticks out the side of the frame and makes is more susceptible to crashes. I recently switched to the in-line mount to see if that is a better solution. - The rubber strap breaks easily. I've broken 2. My friend broke 2 or 3, to the point he just gave up replacing them - Suggestion: It'd be cool if the pump inflator assembly came in optional colours."
The best! Super compact and
"The best! Super compact and very well made."
Buy it!
"Super light and IMO it's a gear you need to have while out riding. I added a CO2 cartridge in the storage compartment."
Q&A
- Hello, I have the 100cc EDC pump kit and love it. I also really like the Clik valve system. The EDC pump does work with the Clik valves but it's not ideal. I was wondering if you have any plans to release an adaptor/chuck/head for the EDC pumps that is directly Clik compatible? Maybe something that could screw in to the existing threads on the head of the pump? Maybe even being reversible, Clik on one end, Presta on the other? Looking forward to hearing from you, thank you.
- Hey Ben! Our pumps should work with Schwalbe's Clik valves, as they do with a normal presta valve, but aren't making full use of that new technology. Due to the design of the Clik valve it can be feel a bit harder when pumping with our pump. We don't currently have any firm plans for an updated pump head or similar, but it's certainly been noted and we will continue to consider compatibility options as that technology develops & gains popularity. Let me know if you have any further questions or suggestions at all.
- Does the pump head work satisfactorily with Schwalbe Clik valves?
- Hey David, our pumps work with Schwalbe's Clik valves as they do with a normal presta valve, but aren't making full use of that new technology. We don't currently have any firm plans for an updated pump head or similar, but it's certainly been noted and we will continue to consider compatibility options as that technology develops & gains popularity. Let me know if you have any further questions or suggestions at all.
- Is the pump bottle cage mount compatible with the Fidlock system?
- Hi Graham! The pump bottle mount will be compatible with the Fidlock system.
- Hi, Curious if you are intending to bring out a Clik valve head for the EDC pump? Trying to decide what pump to buy, knowing this would certainly help! Many thanks, Tom
- Hi Tom, Thanks for your message, I'm happy to help. Our engineers are looking into this, however it isn't something we're going to be releasing in the next few months. I'd suggest taking a look at the Wolf Tooth option as an alternative that is compatible with the Clik valves. Please let me know if there's anything else I can help you with. Cheers,
